Home > Hard Drive > HELP: Windows 7 Can't Recognize My IDE Slave Hard Disk.

HELP: Windows 7 Can't Recognize My IDE Slave Hard Disk.

Contents

Reply Jon Amoncio says: February 12, 2008 at 3:12 amMy motherboard was crashed and need to be replaced. jumpers sata Hmmm i hear google works good… NOT to mention on box and back and paper instruction come with drive it clearly points out where and what the Jumpers are. Also, you mentioned something that concerned me; formatting the drive. Thank You. his comment is here

I got a bug in my computer and had to reinstall XP on it. Do you think its the mobo?I need help though please help me. [emailprotected]i plugged everything nice and snug. They sell all kinds od power cable extentions and adapters. Has a major war ever occured and a map before the war looked exactly the same after? http://www.sevenforums.com/hardware-devices/79774-help-windows-7-cant-recognize-my-ide-slave-hard-disk.html

Second Hard Drive Not Showing Windows 10

This way the hard drive is detected and windows starts up without problems. You should have a spare IDE controller or at least a spare channel/port.If your system didn't have any spare IDE ports, then you could buy a separate IDE/ATA/ATAPI controller card that this info took care of it immediately. Most hard drive kits include a data cable (SATA or IDE, depending on the drive), a power adapter cable (with some SATA drives), and screws.

Reply ian says: December 26, 2008 at 2:19 amhi, nice step by step, but can you tell me how can i locate the slave hard drive when it is not shown Why does it matter? PCMech has long been a fan of Acronis True Image. Internal Hard Drive Not Showing Up However, it does still boot up and run windows.

Risley - it's not easy finding good tech support at 10:30, but I've been waiting too long to get this up new drive up and running to wait, and this little Hard Drive Not Showing Up In Disk Management it started booting slow then slower after a window 7 update which was attempting to install IE11 which failed repeatedly. My PC is running on 2000XP with FAT32. http://ccm.net/forum/affich-32218-2nd-sata-hard-drive-not-shown-on-my-computer it freezes at the windows loading screen.>i formatted and partitoned the SATA drive wiv the disk writer program from Seagate, and now the SATA switches between being one partition or the

My external hard drive was working fine, but suddenly has stopped showing up on the system. Installing Second Sata Hard Drive Without Raid We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks. I was lost with my 500gb disk. All clean of course.

Hard Drive Not Showing Up In Disk Management

http://forum.pcmech.com/forumdisplay.php?f=40 Reply Big Ste says: September 26, 2007 at 4:43 pmVery helpful, thanks. I have lots of data on there that I need to keep can I install it without formatting? Second Hard Drive Not Showing Windows 10 my advice is to follow the link and download the software on the site of the harddrive manufactuer; Such as this link to Western Digital drives site, this will show the Second Hard Drive Not Showing Windows 7 You cannot mix the two on the same controller to my knowlege.

If there is data on the drive you need, you can try hooking it up to an external case or installing it as a second drive in a working computer and this content Your help is greatly appreciated!Dyan Reply Dyan says: December 29, 2007 at 11:32 amJoshcore, can you reply me. And/or can I use one SCSI drive and one EDI drive on this computer? (it does have the hook ups for both types of drives. If, however, you are installing a second IDE drive, it is possible that you will need to alter the jumper configuration of your primary hard drive. Hard Drive Not Showing Up In Bios

So I tried swapping SATA slots, it worked. BUT ALL OTHER DRIVES DO!! Same goes for SATA controllers.I think some SATA drives have legacy IDE plugs on them, but I'd only use the SATA plug with the small serial cable. weblink Reply Josh Fink says: September 1, 2008 at 11:48 pmgreat article, it helps to send something to my dad while i'm at college so that i don't have to explain everything

On a SATA hard drive, position of the drives on the cable does not matter at all because a SATA cable only accomodates one drive.Plug the system in and turn it Internal Hard Drive Not Showing Up In Disk Management So my question to the world is can I put the harddrive into another computor to restore lost files and possibally benifit from 1 computor - 2 hard drives. please throw some light..

Helpful +15 Report iori42 Jan 19, 2009 at 02:52 PM This the full instruction with picture guide from SEAGATE hope this might help.

Or if it's an IDE drive a=have you tried hooking it up to the secondary IDE controller? Flag Permalink This was helpful (0) Collapse - Lost half my SATA drive by PennT / July 26, 2005 6:08 PM PDT In reply to: Mixing SATA and IDE drives in For some people, such sketches help to put everything back when you are done.If you are replacing your old hard drive, remove the cables from the old drive. Windows Not Detecting External Hard Drive But it only recognizes a floppy as the source for the SATA controller.

Helpful +5 Report Eric Jan 25, 2009 at 11:26 AM Awesome advice very straight to the point. I believe this is a ATA-6 model. Reply Ravi says: August 14, 2007 at 8:38 pmI need to install a Sata 160GB to my 3″ external drive, The manual does not tell much about it so is there http://mysqlzine.net/hard-drive/how-can-i-access-files-on-xp-hard-disk-has-a-password.html The physical installation is actually pretty easy.

Do not force them out. With both drives set to Cable Select, the computer will recognize the drive hooked up to the black end connector as the master and the one hooked up to the middle Thanking you, Yours truly, B.Ranganathan Reply Michael says: March 6, 2009 at 5:08 pmThanks. thanks anyway December 24, 2012 Jason Hello, I run Windows 7 64bit and I just installed and double checked the connections for a 1TB seagate HDD.

It came with an 80gb hard drive IDE but noticed it had Sata connections so I bought a used Maxtor 1TB HD. Thanks July 14, 2012 Michael G'day Dave, I have a really weird one for you!